HP Officejet 4650 Printer – Get the Information Before You Purchase

HP Officejet 4650 Printer

HP Officejet 4650 Printer – Get the Information Before You Purchase

The HP 4650 Officejet printer is a great across the board printer that will spare you time, since it can print, output, fax and duplicate all from a solitary machine. I can recollect the fax machine and sweep machines were separate units and kid did they take up a ton of room.

You would now be able to do every one of these undertakings and duplicate numerous pages consequently, and not just that it’s likewise conceivable you may not have the HP 4650 printer in an indistinguishable room from your work area or workstation. On the off chance that you buy the remote model, once introduced it can be put anyplace inside the home office without the should be associated with links.

Starting now and into the foreseeable future, there is no need isolate printers for every one of your work areas or workstations in light of the fact that with the HP OfficeJet 4650 remote printer you can interface various PCs and PCs to your printer.

No more requirement for the messiness of links around your work region, a remote printer wipes out this issue. Everybody in the home would now be able to print, fax or output from the one printer.

 

HP Officejet 4650 Printer

The ink cartridge

Finally, somebody has thought of the immense thought of having a similar number for both ink cartridges. You now simply need to recollect one number and afterwards request either the shading cartridge or the dark ink cartridge.

This presently takes away the issue of attempting to recollect two unique numbers. One of the principle things I generally do with my across the board is to ensure that I have reinforcement cartridges for when I’m running low on ink. There is nothing more regrettable than coming up short on ink and after that waiting for substitutions.

The HP 4650 is a phenomenal economical across the board printer

Spare cash presently by having an across the board printer that will do all your printing for you. It’s difficult to be without this machine due to its modest cost. It can be kept on vitality mode and will startup when it is sent a print order.

There is no compelling reason to keep the HP Officejet 4650 exchanged on consistently. This printer can save money on vitality by exchanging it on vitality mode. The printer would then be able to be kept on vitality mode until the point that it is required and will wake itself up when it is sent a print order.

The great focuses

The cost since this printer is a cheap across the board printer.

It’s quick speed and great print quality.

It can spare time in a bustling office since it can multitask i.e. print, output, duplicate and fax from the one printer.

Awful focuses

The HP 4650 needs programmed two-sided printing.

It doesn’t have a memory card opening.

The paper feed plate stands out from the front a bit.

Who might profit by having this HP 4650 printer?

Individuals who are maintaining a private venture from their home.

Somebody who needs to print from in excess of one work area or workstation.

Somebody who is searching for a vitality sparing printer.

I trust that the great purposes of the HP 4650 printer far exceed the terrible focuses.

This printer with its cost-sparing capacity and modest cost and be an awesome advantage for anybody maintaining an independent company or somebody who needs a decent across the board Officejet printer.

Learn:- HP OfficeJet Pro 6958 Printer Setup Guide

HP OfficeJet Pro 6958 Printer Setup Guide

HP Officejet Pro 6958 Printer Setup

HP OfficeJet Pro 6958 Printer Setup Guide [Latest Techniques]

Struggling to connect your HP Officejet Pro 6958 printer to the computer? Or are you finding the wireless setup problematic? Well, after running through this post, printer installation won’t be a big deal for you. We are here to provide you complete HP Officejet Pro 6958 Printer Setup Guide.

Officejet pro 6958 Printer series are designed to connect automatically to the wireless network using the WiFi-Direct technique. All it requires is installing the drivers from the HP support website and following the on-screen instructions to complete the setup. Once the setup completes your printer will be ready to print the documents wirelessly, once and for all. However, refreshing the printer with the latest drivers is a never-to-forget task for the whole printer life. Getting a bit complex! Let’s make it simple. Scroll down the post and follow the step-by-step process to complete the Officejet pro 6958 wireless printer setup.

The shortest and effective way to set up your HP OfficeJet Pro 6958 printer 

Step 1. Gather your network name and password

Knowing your network name and password is the first step towards installing the printer at your workplace. Make sure to use the private network as the public connections are not suitable for an efficient printing environment. The network name can be found at the back of your wireless router or you may consult the network provider to get that. Here are some important things to note.

  1. Ensure using the same network for your computer and HP OfficeJet Pro 6958 printer.
  2. Your router should have sufficient bandwidth to manage multiple devices on a network.
  3. Place the router close to your printer and computer. The printing environment should be within 5 feet.
  4. Restarting the router, printer and computer is a best practice. It helps in resolving the minor technical glitches in these devices.
  5. Network Name – Here you need to enter the name of the network that you are using.
  6. Network Password – Enter the using passcode that you have set to access your private network.
  7. Try to use the stable and high-speed wireless network to install the latest updates or software downloads.

Step 2. Use Wireless Setup Wizard to connect your HP OfficeJet Pro 6958 printer to the network 

Wireless Setup Wizard serves the purpose of recognizing the device during installation. Here are the steps that you should take to connect the printer to the network.

  1. Turn on your HP OfficeJet printer.
  2. Wait until the display shows “Ready”.
  3. Now tap the Wirelessbutton on your printer panel.
  4. Click the Setupicon and then hit the Wireless Setup Wizard.
  5. You will see the list of available networks on your screen. Choose yours and enter the password in the subsequent field.
  6. If you do not find the network, then scroll down to the bottom, manually enter the network SSID name and enter the password.
  7. Click Okon the confirmation window.
  8. Now your printer will deliver the test printout which will prove the printer is rightly configured.

Step 3. Install the HP OfficeJet 6958 drivers now! 

Done with printer-network setup, now it’s time to install the drivers and finish the computer-printer setup. Printer Driver works as a translator between the printer and computer or we should say it makes the printer understand the language of computer commands. Here are the installation steps.

  1. If you have used the USB cable to establish a connection between the printer and computer, then you must remove it.
  2. Now navigate to the website www.123.hp.com.
  3. You will see the Identify my devicesection, enter the printer model and click Submit.
  4. The list of available software and driver will be displayed on the screen, check them all and click Download.
  5. Go to the Downloadfolder on your computer, locate the file will HP in their name, and run the driver setup.
  6. During the installation process, you will be asked to enter the name of your printer or choose from the list.
  7. Select the printer from the list and click Add Printer.
  8. Finally, keep following the on-screen instructions to finish the printer installation.

Some common mistakes to avoid while printing from HP OfficeJet Pro 6958 

  • Do not use non-recommended sheets, torn or worn papers while printing.
  • Always keep the HP OfficeJet 6958 pro driver updated to the latest version. HP keeps releasing new updates to fight the bugs and errors.
  • If the Driver Unavailablemessage displays then uninstalling and reinstalling the drivers can help.
  • Use a stable network to set up your printer.
  • Do not connect your printer and computer to the different wireless networks.
  • Use the genuine HP components bought from authorized HP retailers or on-line stores.
  • Avoid using the public network to set up the wireless connection.

Facing printer driver installation errors? Talk to printer support experts 

Tried all these steps but can’t install the drivers! Well, that’s quite a common problem with lots of printer users. The reasons could be many, but the solution is one – call the experts on HP Printer Support helpline number. We provide prompt solutions for HP OfficeJet Pro 6958 driver installation including other printer issues. Contact us today for instant assistance.

 

How Do I Connect HP OfficeJet Pro 6968 To PC

HP Officejet Pro 6968 To PC

How Do I Connect HP OfficeJet Pro 6968 To PC

 

HP OJ Pro 6968 All-in-One Printer got the name due to its all-round capability to print, scan, copy and fax. Moreover, HP OfficeJet Pro 6968 connects to your computer quickly through WiFi, Ethernet cable, or via USB to provide top-quality printouts. In fact, you can print directly from your mobile using HP Smart app or connecting the printer via Wi-Fi direct setup.

If you are looking out for a reliable solution to connect HP Office Pro 6968 printer to your computer (Windows or Mac) then fortunately you have landed in a right place. We are here to serve you complete guidelines how do I connect HP Officejet Pro 6968 To PC. This quick setup guide covers all the insights to complete the printer-computer connection process. Let’s delve deeper into it.

Quick steps to prepare your HP OfficeJet Pro 6968 printer to connect to a computer 

Before printer, computer setup you need to follow some initial rituals. It will help your HP OfficeJet Pro 6968 to quickly connect with the computer.

  • Ensure to completely unpack your printer: No packaging material to be left inside.
  • Maintain devices, proximity: Router, computer, and HP OfficeJet Pro 6968 should be placed nearby. Maintain at least 5 feet distance between the devices without any network barrier.
  •   The router signal should be stable: Make sure your router is working well and having sufficient bandwidth. Restarting your router before setup brings good results.
  •   Use personal SSID network: HP printers face trouble connecting on the public networks. You should always connect it to the private network.
  •   Use the same network for printer and computer: Make sure that you are connecting your computer and printer over the same WiFi network. Choosing a different network won’t let your printer to print.
  •   Install the latest HP OJ 6968 driver: Drivers are an essential piece of software to help your printer to communicate with a computer to understand the print command and deliver the output. You can get the drivers and firmware update from the 123.hp.com/ojpro6968 printer.

Steps to setup HP OfficeJet Pro 6968 to system 

Now, as your OfficeJet Pro 6968 printer, computer and router are fully geared up to deliver the max output, it’s time to start connecting them. Here is how to do it.

Step 1. Connect your HP OfficeJet Pro 6968 printer to the main supply, press the power button on your printer, and let it be ready to setup.

Step 2. Insert the paper stack in the feeder tray. Do not overstuff it and place the limited number of sheets to avoid paper jamming while printing.

Step 3. Install the ink cartridges in the desired slots. While unpacking the cartridges, do not touch the copper contacts and never leave them open in the atmosphere. Ensure to remove the orange color safety tape from the nozzle before installing. Insert the cartridges as per color coding on the slots.

Step 4. Make sure your system or computer is turned on, is active, and running well. Also, you should update your Windows to the latest version to avoid incompatibility issues with the printer software.

Step 5. Navigate to the Settings menu, get into Printers and Scanners and click Add a Printer or Scanner.

Step 6. Now your computer will start looking out for the printers around and after detecting an OfficeJet Pro 6968 printer, the name should appear on the system’s screen.

Step 7. The next step is to follow the on-screen instructions to download and install the latest drivers on your system. You need to keep checking for the new drivers once every three months to enhance your printer’s productivity.

Step 8. Once done with installing the drivers, click Add Device button.

Step 9. Now get the WPS pin from your OJ 6968 printer, enter it on your system and click Next to finish the printer setup.

Challenges you may face while connecting HP OfficeJet Pro 6968 printer to PC (Solutions) 

Problem 1. Your computer is not detecting HP OfficeJet Pro 6968 printer.

Solution 1. There could be several reasons that prevent your printer to connect to your computer. Here are some troubleshooting measures that work well to fix it.

  • Disconnect the USB cable and reconnect it. Ensure the cable is good and not frayed at least.
  • Always connect the USB cable when prompted by your PC.
  • Make sure the network is stable, high-speed, and having sufficient bandwidth.
  • You might be connecting your printer and computer over a separate wireless network. Get them connected to a common WiFi network to fix the problem.

Problem 2. HP OfficeJet Pro 6968 printer shows offline even when a router is actively responsive.

Solution 2. An offline HP OfficeJet 6968 pro printer is a quite common problem that can prevent your printer from delivering printouts or debar it from responding to your commands. Follow the below instructions to fix it.

  • Choose your HP OfficeJet Pro 6968 printer as a default device under the Printers and Scanners section.
  • Make sure the Use Printer Offline option is not chosen in Printer settings.
  • Restart the router to bring it back to the live state.
  • Clear the pending and failed print jobs in the Print Queues to get rid of the problem.

Facing any trouble connecting HP OfficeJet Pro 6968 printer to the PC? Call The Experts Now 

Connecting HP OfficeJet Pro 6968 printer to the computer will be an enjoyable moment, only when you do it the right way. Or else this will become the nastiest and time-consuming process. If you need any sort of assistance for HP Printer Setup or have any query regarding the HP OJ Pro 6968 printer setup, you can connect with us on the HP support helpline number. Our services are available 24/7 to assist you.

How To Connect iPad To Wireless HP Printer?

How To Connect iPad To Wireless HP Printer

How To Connect iPad To Wireless HP Printer? Get The Best Guide

In today’s world, many printers launch with a feature known AirPrint, which allows iOS devices like the iPhone and iPad to print wirelessly. Though, it is the fact that iPad can print to any AirPrint-compatible wireless printer. Many wireless printers include AirPrint, making the printing job easy and hassle-freely. You only need to know How To Connect iPad To Wireless HP Printer in a correct way and after connecting it you can print wirelessly for sure.

Although, There’s no requirement of setup or configuration for AirPrint printers; when you want to print, the only thing you have to ensure that you’re on the same Wi-Fi network, find the print option in the iPad app’s share menu, select the HP printer, and print. If you don’t have an AirPrint-enabled printer, you will still be able to print if you install a printing app for your wireless printer. In this post, we will show you what to do for connecting iPad to wireless printer to start printing function wirelessly. Let’s give a glance over here!

Quick Steps To Connect iPad To Wireless HP Printer

Well, in order to print anything without any kind of hindrance, your iPad will have to be well-connected to an AirPrint-compatible printer. Step-by-step procedures are mentioned underneath so go through accordingly so that you can Connect iPad To Printer wirelessly soon and started with printing solution.

Lets’ begin to follow the provided instructions:

  • First, make sure the printer is properly plugged in to a wall-outlet, then press the “Power” button on the printer.
  • Now, you need to disconnect the printer’s Bluetooth or cable connections if they are already connected. However, when you want to connect your printer via AirPrint, your wireless HP Printer neither to be connected to your computer via Bluetooth nor to be connected to a router via an Ethernet cable.
  • Connect your HP wireless printer to Wi-Fi if it is necessary to do so. If your printer isn’t already connected to a Wi-Fi network, use the printer’s menu to select a strong Wi-Fi network connection.
  • In the next step, you need to open your iPad’s Settings. Give a click on the Settings app icon which looks like a grey box with gears on it.
  • Lets’ begin to follow the provided instructions:

  • Now, give a click on “Wi-Fi” tab. It’s near the top-left side of the screen. Doing this will open your iPad’s Wi-Fi menu.
  • Afterward, you have to give assurance that you’re connected to the same network as your printer. It is quite essential that your iPad has to be on the same exact wireless network to which you have connected your AirPrint printer. If in case you aren’t connected to the same network, place a click on the name of the printer’s network, enter the password if asked, and then tap Join. Doing so will then connected both the devices on the same network.
  • Place your iPad near your AirPrint printer. For the best suitable results, you always want your iPad to be placed within a few feet away of your printer, though it’s usually safe to have the printer in another room.

Once you have successfully connected your iPad To Wireless HP Printer, you are now free to print anything. In the below, we will show you how to print from iPad wirelessly. Give a glimpse of the noted information.

Required Steps To Connect iPad To Wireless HP Printer

Here are the desired possible steps you should go through for printing with AirPrint. Thus, let’s do that:

  • First open the app you want to use simply by clicking on the app icon.
  • Now, open the page or document on your iPad that you want to print. For example, if you’re printing from the Photos app, you’ll have to select the photo from the gallery to get the printout of it.
  • In the next step, give a click on the “Share” icon. It’s usually located in one of the corners of the screen, though you may find it in the URL bar or the ⋯menu if you’re using a browser. You can see a pop-up menu appear at the bottom of the screen.
  • Now, Tap “Print” option. This printer-shaped icon is placed in the bottom row of the pop-up menu. This will open the Print menu.
  • Click Printer option from the top of the menu. After doing this, a list of the compatible AirPrint printers available within range will be opened-up.
  • From there you will have to select your HP wireless printer. Give single click on the name of the printer with which you want to print your item from.
  • Finally click “Print” tab. It’s in the top-right corner of the screen. The selected item will begin printing. In a second you can get quality printouts, guarantee.

Contact To Online Tech-Support Team For More Info

If the aforementioned information does not work out for the way to Connect iPad To Printer, don’t take stress! We are here for your better help and support. You only need to contact us via 24/7 HP Printer Support Number as fast as you can. Afterward you will definitely get handy guidance just by sitting at your home. We have hands of experience in serving quality assistance to helpless users. So, don’t hesitate while making conversation with us. We give you proper instruction so in the blink of an eye you will be applicable to connect your iPad to wireless printer and hence print anything wirelessly.

 

How To Fix HP Printer Light Blinking Issue?

HP Printer Light Blinking Issue

How To Fix HP Printer Light Blinking Issue?

HP Printer light blinking issue can occur due to various reasons. If you are also facing this problem with your HP Printer and wondering what’s causing it, then you’ve come to the right place. In this blog, we will clear your doubt about “Why is my HP Printer light blinking” and let you know everything about it.

These blinking lights help you know the status of your printer when you send any commands to the printer. You will see these lights flashing and turning off at times that help you know what’s going on with your printer. The information mentioned in this blog is according to the most common HP printers, for example HP Deskjet F4480 or 1515.

When All HP Printer Lights Are Off

In this case, you will notice that no HP Printer lights are blinking. That includes the Power light, Attention light, Ink error indicator, Color ink level icon, Black ink level icon, Segment display counter, and a media error indicator. The only possible cause of this problem is that your printer does not turn on.

Given below, we have mentioned the solutions you should follow to try turning on your printer.

  1. Check whether the power cord is properly plugged into the rear of the printer.
  2. Next, check whether the power cord is inserted properly in the power supply.
  3. Once you have checked all the connections, turn on the printer machine from the power button.
  4. If the power light turns on, your problem is solved. However, if there’s still no indicator of light anywhere, continue with the next step.
  5. Unplug the power cord from the main power source and try connecting another appliance.
  6. If the other appliance also doesn’t work, it means that there’s an issue with the power outlet. You should connect your printer to another outlet that works.

Any temporary issue with your printer should be fixed by following the above checks and solutions. However, in case your problem persists, you should contact HP Printer Support for assistance right away.

What Does It Mean When All Lights Are Flashing On an HP Printer?

All HP Printer light blinking indicates your HP printer is in the error state. You will see the power light, color ink cartridge light, attention light, black ink cartridge light all blinking at the same time. If this is happening to your HP Printer as well, then you must not be able to print anything from your printer. To fix an HP Printer in the error state and stop the HP Printer light from blinking, you should follow the steps below:

  1. The easiest and the best way to troubleshoot an HP printer in the error state is by resetting your HP printer. So the first step is to unplug the power cord of the printer from the socket.
  2. Leave the printer unplugged from the socket for at least 15 minutes and then reconnect it.
  3. Power on your printer from the wall socket as well as the printer power button.

After performing the above-mentioned troubleshoot, you should be able to fix the HP Printer light blinking problem. Try printing something from your printer to confirm if everything is alright. In case your printer is still in an error state, you should connect with our HP Printer Support experts for remote assistance.

Steps To Fix The HP Printer Light Blinking Issue Problem?

Given below are the basic troubleshooting steps you can follow to fix the HP printer  light blinking problem on your own:

  1. First, remove the ink cartridges from your printer and unplug the power cord from the printer and then the main source.
  2. Remove any USB cable connected to the printer.
  3. Leave the printer unplugged for 5 minutes and then press and hold the power button.
  4. The next step is to connect the power cord to the printer and the power source once again.
  5. Plug back the USB cable connecting your printer to the computer.
  6. Start your HP Printer from the power button and check if the HP printer lights blinking are stopped or not.

In most cases, the above method will work. However, if the problem persists and you can’t even find the cause behind the issue, download HP Scan Doctor on your PC. Once you’ll run the HP scan doctor on your device, it will troubleshoot your HP printer for any errors and issues. Alternatively, you can also reach our HP Support experts for assistance and let them fix your HP printer instead.

Conclusion:

We hope your HP Printer Light Blinking problem is resolved after reading this blog. In case of any particular error code or messages displaying on your printer control panel, you should refer to our troubleshooting guides. The printer isn’t turning on or working? You should contact us to get help from our printer experts.

How Do I Fix HP Laptop Keyboard Not Working Problem?

HP Laptop Keyboard

How Do I Fix HP Laptop Keyboard Not Working Problem?

HP laptops have evolved from bulky boring machinery to sleek, stylish, and high-performance monsters. Such a massive improvement has led to a rise in sales and huge trust build amongst the users for HP laptops. However, still, there have been a few instances where the users have reported their HP laptop keyboard not working and despite trying a few troubleshooting steps their laptop’s keys remained locked.

Why your laptop’s keys are not working? Whether some keys not working on HP laptop or keyboard is not typing any letter? Whatever is the problem with your laptop keyboard, we have got you covered here in this blog. You will learn.

  • Reasons due to which your laptop keyboard is not working.
  • Troubleshooting steps to revive laptop keyboard.

Let’s get started.

Why Your HP Laptop Keyboard Not Working?

Well, it doesn’t just happen due to a single reason, instead, a lot of causes compels your HP laptop keyboard to breakdown. Let’s have a look at the wildest possibilities due to which your laptop’s keyboard might not work.

  1. Faulty keyboard drivers: That may be the first and foremost reason triggering an error with your laptop’s keyboard. Whenever you update the Windows to the latest version, it might not support the existing laptop’s drivers version hence causing the HP laptop keyboard not working problem.
  2. Keyboard drivers are outdated: Another possibility could be an outdated keyboard driver. A simple fix would be to visit the HP support website and install the latest driver version.
  3. Misconfigured laptop settings: Any mishandling during the keyboard setup process may also become a cause for HP laptop keyboard locked or not working problem.
  4. Keyboard not working after a BIOS update: You might have applied the BIOS update to your HP laptop. In that also you might face a problem with your laptop, although, the problem resolves temporarily after rebooting the system.
  5. HP Laptop is old or keys are damaged: In case you are using those old school HP laptops and your laptop’s keyword stops working then you shouldn’t be worried about it. See some laptop expert or replace it with a new machine. Also, if it seems that your laptop keypads are faulty then connect with a specialist for troubleshooting.

How To Resolve HP Laptop Keyboard Not Working Problem?

Once you know all reasons for the HP laptop keyboard not working issue, you have to delve deeper into troubleshooting the problem. Here are some effective steps worth giving a try.

Method 1. Clean reboot your laptop 

Rebooting is undoubtedly one of the best ways to deal with HP laptop keyboard failures. Even if your laptop freezes or lags, that can be resolved by performing the clean boot. This process refreshes your system and eliminates internal bugs and errors.

Method 2. Check if the alternate keyboard is working or not!

In case, rebooting couldn’t revive the consciousness of your laptop’s keyboard, then you should immediately check if an alternate keyboard is working or not.

If an external keyboard is working well, that indicates the problem with your HP laptop’s hardware. You should immediately connect with the laptop experts and get the problem resolved.

However, if an external keyboard is also not working, then a few tweaks in the laptop’s software might work wonders. Proceed to method 3 for such tips.

Method 3. Uninstall and reinstall the keyboard driver

If you found an external USB keyword not working too on your HP laptop, then you will need to reinstall the keyboard drivers. Start with uninstalling the drivers from the control panel. Here is how you should proceed.

  • Go to the Control Panel section.

  • Choose the Device Manager option.

  • Locate the keyboard drivers.
  • Right-click on it and select Uninstall drivers.

  • When you are done with it, simply reboot your system and the drivers will be automatically reinstalled.

Method 4. Update the keyboard drivers to the latest version

Sometimes, merely updating the keyboard drivers also work wonders to fix the HP laptop keyboard not working error. This troubleshooting measure is highly effective when the problem occurs due to incompatibility issues of keyboard drivers. Here is how to fix it.

  • Go to Control Panel.
  • Click Device Manager.
  • Check the keyboard driver menu for any updates and install them on your HP laptop.

Method 5. A hard reset, if the issue occurred after BIOS update

A hard reset will help you decrease the amount of power stored in hardware components. Here are how to hard reset your system.

  • Shut down your laptop and remove all laptop’s peripherals.
  • Make sure during a hard reset, no external devices connect to your laptop.
  • Now you should remove the Power cable and dismantle the battery from the laptop.
  • Press and hold the power button for 20 seconds to drain the residual charge from the capacitors.
  • Now you may insert the battery again into the battery compartment and connect the power cable back to the laptop.
  • Press the Power button on your laptop and connect other external devices (if any).
  • Finally, under Startup Menu, choose the option Start Windows Normally and hit Enter.

Connect With HP Laptop Experts To Revive The Keyboard

Besides, trying your hands on these fixes, you may also try to clean the laptop keyboard. Blowing off the dust using from keypad provides amazing results. However, if the laptop keypad still does not respond even after cleaning the keyboard surface, then you must see a laptop expert. Dial the laptop support team and get the HP laptop keyboard not working error fixed. The HP Laptop Support team is available 24/7 for prompt troubleshooting.

Read more about our latest blog.

How To Clean Print Heads?

How To Clean Print Heads

How To Clean Print Heads? Get A Fruitful Guide Here

The frequency of Printing plays a vital role in getting quality printouts. Those who print regularly more often won’t experience any technical problems during printing functionality. But those who print rarely over long periods may not receive clear or quality printed documents. The delivered printed pages most probably are faded, streaked, or even blank. Though, such a problem is generally been caused by the clogged printhead. The printhead blockage problem mostly happens when the ink is dried up and hence hindrances in the ink flow. To learn How To Clean Print Heads hassle-freely, read the post carefully. We have mentioned the beneficial guidelines in order to clean the clogged printer head. Thus, stay tuned till the end!

What Is A Printhead For A Printer?

The printhead is essential printer equipment whose role is to transfer the limited amount of ink onto the page. It does this by firing small droplets of ink via different printer nozzles to produce top-rated printouts. When any of the printhead nozzles get blocked for any unknown reasons your printed pages start appearing faded or unclear. This is however a big problem; you don’t need to get your printer repaired or even purchase a new cartridge. In fact, the clogged printhead is inevitable and can be solved simply by cleaning the printer printhead. It is even though located under the cover of your printer. Thus, it can easy for you to detect whether the printhead is clogged.

replacements can be hard to find, it is usually cheaper to just buy a new printer.

Clean Print Heads

You can Clean Clogged Print Heads more efficiently and smoothly just by taking a dry paper towel. Here’s what you should perform:

  • First, you should take a warm damp paper towel and then slightly remove the printhead nozzles.
  • Now, facing the printhead down onto the paper towel.
  • Next, grip the cartridge tightly with the printer head facing down against a dry paper towel for 2-3 minutes. After doing so, a dry paper towel will soak the extra ink.
  • Now, reinstall the cartridge and print a test page to check.

How To Clean Print Heads?

How To Connect iPad To Wireless HP Printer

 

This is How To Clean A Print Head in an effortless manner. It is an easy and simple process and can take a few minutes only to complete.

NOTE: Do not wipe the print head or touch the electronic components otherwise they may cause damage.

Possible Methods To Clean Clogged Print Heads

If your Printhead is dusty or nozzles are congested, then this problem could lead to patchy or erroneous printing. In such a situation, you need to know How To Clean A Clogged PrintHead. If you have less technical skills and unable to it, don’t worry! We have come up with various effectual solutions to fix this issue. Let’s take a look at instructive information:

Method 1: Use Self-Cleaning on Windows

Here’s what to perform for this:

  • From the bottom-left corner of the screen, click the Windows logo.
  • After clicking on the Start button, type “Control Panel” in the field to search for the control panel.
  • Once you see the Control Panel, place a single click on it.
  • Next, open “Devices and Printers” which is in the printer-shaped icon.
  • Now, place a right-click on the name of the printer that needs cleaning. You’ll find it beneath the “Printers” heading near the bottom of the page. Doing so a drop-down menu will appear.
  • Now, place a single click on the “Properties” option at the bottom of the opened list. Doing so a new window will appear.
  • In the next step, click the “Hardware” or “Maintenance” tab at the top of the window.
  • Some printers have the self-cleaning option in a “More Options” or a “Tools” tab as well.
  • Now, click the “Cleaning” option. This option generally says “Clean Heads” or “Clean Cartridges”. So, always keep an eye out for any “Clean” option on the page.
  • If you can’t find this option to Clean Clogged Print Heads(or “nozzles”, or “cartridges”), consult your printer’s manual. It might be possible that your printer has not a self-cleaning option. So, through online documentation, you can solve it manually.
  • Afterward, follow the on-screen prompted instructions accordingly. By following the prompted steps the clogged printhead or nozzles will be completely cleaned. Now, you can resume printing your documents.
  • If your printing results are still pointing to the clogged print heads, then try cleaning manually.

Method 2: Use Self-Cleaning On MacOS

If you use your printer on MacOS, you have to skip the above one and go through the below beneficial guide. Here’s how to use Self-Cleaning on your Apple phone:

  • First and foremost, tap on the Apple logo in the top-left corner of the screen. Doing so an Apple menu will appear.
  • Now, from the drop-down menu, select the “System Preferences….” Option.
  • Thereafter, click the “Printers & Scanners” tab which is shown in the printer-shaped icon. You can view this option at the far-right side of the System Preferences window.
  • Now, choose a printer for which you want to run the self-cleaning program. Simply, give a single click on your printer from the left side of the window.
  • Now, in the new pane, click “Options & Supplies….”. You’ll get this option in the middle of the window.
  • In the next step, place a click on the “Utility” tab which is at the top of the page.
  • Now, tap the “Open Printer Utility” tab which is in the middle of the page.
  • Afterward, select the “Cleaning” option from the drop-down arrow. The location and appearance of this option may differ as per your printer model. But in general, a Head Cleaning or Cartridge Cleaning option is seen on this page.

     Clean Print Heads

  1. If you can see a drop-down box at the top of the window, then give a click on it. And then click the “Cleaning”ink option in the drop-down menu.
  2. If you can’t see a “Cleaning” option, then it is clear that your printer does not support self-cleaning. Check the printer’s manual or documentation online to validate.
  3. Follow on-screen guided instructions correctly. Continue clicking the prompted steps whatever appears during the cleaning process. Otherwise, your printer should clean itself, after which you can resume printing without any disruption.
  • Other than that you have an option to print a test page that will ensure whether the cleaning process worked.

Method 3:  How To Clean Print Heads Using Manual Cleaning

Here are the required steps you should swiftly go through in order to clean the HP Print Head. Let’s start implementing the following instructions one by one:

  • Before start manually cleaning your print heads, you will have to gather the following items:

     1. Isopropyl alcohol

     2. Water

     3. A bowl or pie tin

     4. Paper towels

  • Now, turn off your printer and unplug it right now. This will prevent you from damaging your printer component or hurting yourself while removing the cartridges and the printhead unit.
  • Afterward, carefully remove the cartridges. To do this, first, open your printer’s main casing and thereafter take out the ink cartridges slightly one by one.
  • For extracting the cartridges in an appropriate way, you should consult your printer’s manual or online documentation.
  • Now, softly take out the print head unit from your printer device. This is the tray in which the cartridges sit. Give a glimpse of the several holes in the bottom of the print head unit. If your printer uses cartridges that have print heads on them, you are suggested to skip this step.

    Clean Print Heads?

  • Now, produce a 50/50 mixture of isopropyl alcohol and water. Take half a cup (four ounces) of each one and mix the two properly. However, the mixture shouldn’t damage the print head itself.
  • Now, pour the mixture into the bowl. Keep the mixture shallow to start—you can always add more if anytime required.
  • Afterward, place the print head unit in the alcohol and water mixture with full awareness.
  • If your printer uses cartridges with built-in print heads, then place the cartridge in the mixture instead.
  • Leave the print head alone for at least a couple of minutes. After completion of a few minutes, you can notice that the print head’s dried ink has now turned to loosen.
  • After that, wipe the print head on a paper towel. Doing this will eliminate any excess moisture and simultaneously eject ink from the surface of the print head.
  • Now, place back the print head unit and/or cartridges, plug back in the printer, and then turn it on.
  • Print a test page to check whether you got your answer to the query How To Clean Print Heads. Your printer will probably work just like it was previously working.

If your printer still won’t print accurately, leave the print head or cartridges in the alcohol and water mixture overnight.

Obtain 24/7 Online HP Printer Support For Hands-Free Solution

Now that you better know How To Clean Print Heads. If you are struggling with poor printouts and your printhead required cleaning, the aforementioned tips help you to do it. In case, you got stuck at some point while performing the given fixing methods, you can contact HP Printer Support. Call us at 24/7 online accessible helpline number and communicate with our technical team. Your problem will be instantly solved within a pinch.

Read more our latest blog.

 

How to check HP printers ink levels

How to check HP printers ink levels – beginner’s guide

When HP Printers Ink levels are low, it can affect the quality of the printout or not print at all. The simple solution is to refill those ink cartridges or replace them with new ink. But before you do so, you need to check the ink levels on your hp printer. In this blog, we have described how to check ink levels on HP Printer in different ways. Let’s not waste any time and get started with it right away.

How To Check HP Printer Ink Levels From Printer Control Panel?

Many HP printers, display the ink and toner levels on the control panel only. This might be the simplest way to check the HP printer ink level. Just follow the simple steps below to check the supplies information on your HP Printer.

  1. On your Control panel, navigate the ink drop icon. There you can see the ink levels of your HP printer.
  2. If you don’t see any ink drop, then look for
  • A Cartridge Icon
  • Toner Level Indicator
  • Or Ink Levels menu

Ink Levels of HP printers can be found under the above options. If you don’t find any such options on your HP printer control panel, there’s no need to panic and continue reading further for more methods to check ink levels.

How To Check Ink Levels on HP Printer From Windows?

If you are using your HP printer from a Windows device, you can simply check the ink levels by following the steps below. Make sure you follow the steps in the given order only.

  • First of all, press the Windows button on your keyboard or click on the Start menu.
  • Now search for Devices and Printers in the Windows search bar.
  • From the search results open Devices and Printers. Here you will see the list of available and connected printers.
  • Select your HP printer for which you want to check the ink level.
  • You can see the ink levels for your HP printer below the status area. For more information click on it.

Other ways to check HP printer ink levels from Windows PC:

  • From HP Smart App (Windows 10): First you need to install the HP Smart app from Microsoft Store in English. To do so, open the Microsoft store and search for HP Smart. Click on the Install button and wait for the installation to finish. Once it’s done open the HP Smart app on your device and you can see the Ink or toner levels on the home screen only.
  • From HP Print And Scan Doctor: You can download the HP Print and Scan Doctor from the HP Support website. Once installed, open the utility on your Windows PC and select your printer. Select the Printer option on the top menu bar and select Supply Levels. You will see the Ink levels displayed on your screen now.
  • From Printer Software: Click on the Windows search bar and enter your printer model name and number. From the search results, select your printer name. Doing this will open the HP Printer Assistant. Select the Estimated Ink Levels option to see the ink levels on your HP printer.

If your HP printer doesn’t show up in the search results, then you need to install the HP Printer Assistant on your device first. You can download the software from the HP Support website, on HP Software and Driver Downloads page.

If you are using HP laser Printers, you can check the HP printer ink levels from Easy Printer Manager. Simply search for the tool on Windows search and navigate to the Supplies information tab.

How To Check HP Ink Levels On Mac?

You can check the ink or toner levels from your Mac using the in-built printer software. To do so, follow the steps given below:

  • Select the Apple icon and go to System Preferences.
  • Now select Printers and Scanners, Print & Fax, or Print & Scan.
  • From the available printers, select your HP printer and then click on Options & Supplies.
  • Now go to the Supplies tab where you can check the HP printer ink levels.

How To Check Ink Levels On HP Printer (Android, iOS)?

You can check the HP printer ink levels from your Android or iOS device by using the HP Smart app. Install the HP smart app from the device’s app store or 123.hp.com. Once you have downloaded and installed the application, add your printer to the application and then you can access the ink or toner levels on the home screen only.

How To Check Ink Levels On HP Ink Tank and Smart Tank Printers?

To check the ink levels on your HP Ink Tank or Smart tank printers, you need to look for it visually on the printer machine only.

The ink levels should be between the minimum and maximum fill lines. If the ink level is below the minimum line, then it can bother the print quality. If the ink level is above the maximum fill lines, it can cause leakage of the ink. Moreover, improper filling of ink can cause damage to your HP Printer. Also, do not use non-HP ink if your printer is under warranty and don’t want any complications in the future.

Conclusion

These were all the methods that you can use to check the HP printer ink levels. You can use any of it to check the toner or ink levels of your HP printer. Replace or refill the ink as required to maintain the printing quality. And if you need more help, feel free to reach HP Support anytime.

HP Printer Not Responding – How To Resolve It?

HP Printer Not Responding

HP Printer Not Responding – How To Resolve It?

HP Printers are all over world famous device for printing, scanning, and faxing purposes. Many people prefer using printers of this brand because of its budget-friendly and quality-prints solution. It has several astounding features that make your print job ease and smooth. However, that doesn’t mean you cannot face any kind of technical problems while printing documents, images or other necessary files. In fact, there are times when HP Printer Not Responding when you give a Print command on Windows or MacOS. In such a situation, it will be complete worthless to be frustrating, just try searching effective solution to fix it. Luckily, you are at right page as numerous distinctive troubleshooting methods are discussed here. Let’s read it out!

Why Is My Printer Not Responding?

During printing, the computer thinks that your printer is offline which is why Printer Not Responding error occurs. Furthermore, improper cable connection or paper-jam is also been the possible reason for which your printer doesn’t work or respond. Additionally, missing or corrupt printer drivers can also stop your printer to be responding.

What To Do When Wireless Printer Not Responding?

However, when the Wireless Printer Not Responding while printing, check that the printer is well-connected to the correct Wi-Fi network. If there is a Wi-Fi network issue, then it’s guaranteed that your printer doesn’t print. That’s why, check it very seriously and confirm that everything is all right.

Causes Of The Occurrence Of HP Printer Not Responding Issue

Several realistic factors are responsible for Printer Is Not Responding error issue. A few of them are enumerated below. Checkout once:

  • Defective USB cable.
  • Loose cable connection.
  • A Printer is not tightly connected to the system.
  • Inappropriate or incomplete installation of printer software.
  • The printer driver installed in PC might be missing which may further lead to My Printer Is Not Responding.
  • The driver might be corrupt or damaged.
  • Insufficient papers are most probably loaded in printer tray.
  • Ink cartridge is out of stock.

Solutions To Fix HP Printer Not Responding Issue

We have outlined genuine and effectual fixing ways to get rid of the HP Printer Not Responding error. Therefore, implement the following solving methods one by one until the problem gets disappeared from the root. Let’s begin:

Solution 1: Verify The Printer Connections

Whenever you see the HP Printer Won’t Print error message, you should immediately check and verify the printer connection. Most of the time, such an issue arises due to a connectivity issue. Here’s what you need to perform:

  • First, shut down your PC, turn off your HP printer and other external components as well attached to it.
  • Now, unplug all the cables and wait for around 2-3 minutes.
  • Attach all the cables properly now and restart your computer.
  • Wait for your printer to inactive and silent.
  • Also, you can test your printer by connecting it to another system.
  • Check the entire cables that are used for connecting the devices. Make sure cables are appropriately plugged in.
  • If in case, the printer connects via a USB port, try connecting it with another USB port.

If yet the HP Printer Not Responding, move to the next solution.

Solution 2: Reboot The Print Spooler Service

To print with no hindrance, Windows relies on Print Spooler service. But some certain issues with this service can also trigger the Printer Not Responding error. And, restarting the spooler service can probably resolve the printer problems and everything will start working again. So, follow the below-instructed points to do the same:

  • Press Windows Key + R together to invoke the Run command.
  • Type in “services.msc” the search field.
  • Now, hit “Enter” or tap the “OK” button.
  • After doing so the Services window opens.
  • Locate the “Print Spooler” option from the given list and then give a double-click on this tab.
  • Now, open the “Properties” window by placing a single click on it.
  • Afterward, set the Startup type to “Automatic” and select the “Start” button to start the service.
  • If the service is not running well, click the “Stop” button present under the System Status tab. And then click “OK”.
  • Now, wait for a couple of minutes and then again tap the “Start” button.
  • Now, reboot your system to see if the Printer Is Not Responding error has been solved or not.

Use the next solution if the above one doesn’t work.

Solution 3: Make Sure The Printer Is Accurately Configured

Here’s how to check it out:

  • First, open Control Panel on your Windows Desktop.
  • Now, go to the “Devices and Printers” section.
  • Find your printer from the list of printers; place a right-click on it.
  • Now, choose the “Printer properties” tab.
  • Go to the “Ports” tab.
  • Make sure, the correct port is chosen.
  • Now, click “Apply” and “OK” to finally save the changes.

After making all these basic adjustments, check if the printer is responding or yet not. If the same problem still persists, go to the next solution.

Solution 4: Reinstall The Printer Driver

When the Printer Is Not Responding till now, then try reinstalling the printer driver. Here’s how to do so:

  • First, press the “Windows + R” keys on your keyboard to evolve the Run command.
  • Now, type “devmgmt.msc” into the Run dialog box and hit “Enter”.
  • Expand the Printers category. Then choose the printer you are using and place a right-click on it.
  • Now, select “Uninstall device”.
  • Give a check to the option “Delete the driver software for this device”, and then click “Uninstall” to confirm.
  • Now, the Printers category has been removed.
  • Further, reinstall the latest release printer driver via the manufacturer’s site.

Once you have the upgraded version of printer driver in your PC, your printer will start responding. But if unfortunately, yet it is not working, move to the next solution.

Solution 5: Select Your Printer As A Default Printer

If your printer is not selected as default one, then the HP Printer Not Responding error will definitely occur. So, check it out first and ensure that it is opted for a default one. If not, follow the given steps:

  • First, open the Cortana Search Box on your Windows system and enter default printer into the search field.
  • Now, select “Change default printer” to directly open the window.
  • Now, at the bottom left of that window, you can see the option “Let Windows manage my default printer”. If this option is on, then switch it off by shuffling the button.
  • Now, from the Control Panel, go to the “Devices and Printers” tab. And make sure a green tick is highlighted to your default printer. Alternatively, you can right-click on the printer and select the “Set as default printer” option.

HP Printer Not Responding on Windows problem will now be annihilated from the root. In the next section, we will see how to fix the same problem appears on MacOS. So, continue reading!

Solutions To Fix Printer Is Not Responding Mac

We will walk you through the productive course of actions so you can easily fix Printer Not Responding Mac. Simply, try the following stepwise methods to solve it:

Solution 1: Reset The Printer/Network Connection

  • First, turn off your printer, wait for a minute atleast and then turn it on to resume the operation.
  • Print a test page to check if the HP Printer Not Responding on Mac issue has been rectified. If it is yet not, proceed to the next step:
  • Go to the “Apple” menu.
  • Select the “System Preferences” option from the given list. Doing so a new window with the same name appears.
  • Under the “Hardware” section, click the “Print & Scan” tab.
  • Now, place a right-click anywhere onto your Printers window display and press the “Reset Printing System” tab.
  • Now, tap the “Reset” button in the confirmation wizard.
  • After doing so Admin prompt may appear on the screen.
  • Next, you will have to enter your Admin id and password correctly.
  • Then, click the “OK” button on the wizard.
  • Finally, press the “Reset” button.

After resetting the printer, Printer Not Responding Mac error might have been resolved. But if yet not, use the next solving guide.

Solution 2: Check The USB Connection

Make sure the USB cable is not damaged otherwise you can face the Printer Not Responding error.  Also, you have to ensure that it is securely connected to the ports of both printer and the Apple device. Always prefer USB cable 2.0 while connecting the devices. Once you connect that, follow the below-noted steps :

  • Once the cable is connected properly, select the “System Preference” option from the menu.
  • Now, under the “Hardware” section, click the option ‘Print & Scan’.
  • Wait for the system to identify the target printer.
  • Now, select your exact Printer model and hit the “Add” button to successfully add your printer in the printer list.
  • At the end, print a test page to see if your printer is functioning well.

I think you got your answer now to your query How To Fix Printer Not Responding on Windows or MacOS.

Obtain HP Support Assistance Anytime From Our Tech-Savvy

If you are still experiencing the HP Printer Not Responding issue even after precisely executed the aforementioned guidelines, contact us. We are deft connoisseurs working dedicatedly day to night to serve you one-stop HP Support at your doorstep. So, feel free to call us at the 24/7 accessible helpline number and get united with us. After following our guidance, it is 100% surety that your printer will start functioning well.

How to Fix HP Printer Driver is Unavailable on Windows 10?

HP Printer Driver

Are you troubled with the problem of HP printer driver is unavailable on Windows 10? If yes, then you have come to the right place to seek a solution. The drivers are the most essential part of printer, computer system, and other electronic devices. Your device may not work if the drivers are corrupted. When you come across any issue, which states that HP printer driver is unavailable, then you must fix that problem as quickly as possible.

Mentioned below are the steps that you need to carry out in order to fix this problem. The unavailability of printer driver creates a huge problem and does not allow you to perform printing function using the printer device.

Solutions to Resolve the Problem of HP Printer Driver Unavailable:

Mentioned below are the two solutions that you can perform in order to fix HP printer driver is unavailable on Windows 10.

Reinstall HP Printer Driver-

A mismatched or corrupt printer driver is generally the cause of this HP printer driver unavailable problem. This solution is very simple and easy to carry out. All you need to do is to uninstall the current driver and then install the latest version of the driver.

Stated below are the steps that you need to carry out.

Press the Windows key and R key simultaneously and then go to the Run box to fix HP printer driver on Windows 10.

 After that, type devmgmt.msc and hit the option of OK.

Start locating your printer device and then right-click on it. After that, select the option of Uninstall Device.

Now, select the option of “Uninstall” if it asks for your confirmation.

After that, download and install Driver Easy. The software will recognize your system automatically and then it will rise looking for a correct printer driver for it together with any other printers that are needed to be updated.

Implement Driver Easy and then select the option of Scan Now. The driver will begin to scan your system and detect if there is any problem with the drivers.

Tap on the option of “Update All” in order to automatically download the correct version of the software that is either outdated or not present on your system. You may also need to download the Pro version of Driver Easy to perform this step.

If by chance you don’t get satisfied with the pro version, then there is nothing to be apprehensive about as it offers you 30 days replacement guarantee. Or else you can do the manual installation of the drivers.

All you have to do is to select the option of update that is placed right after your printer to download the perfect driver automatically. Once the download is complete, you can install the driver manually.

Go back to your computer system and print the file to see if it works or not. In case your printer device works perfectly without any issues. In case it does not, then move ahead with the next step.

Install the Updates HP Printer:

In case you have not updated your Windows in a long time, then maybe that is the reason why printer driver is unavailable. Mentioned below are the steps that you are required to follow in order to download updates on Windows 10.

How to Install Updates HP Printer on Windows 10?

If you are a user of Windows 10, then below mentioned are the steps that you are required to follow.

Launch the Start menu and then type Update there. Then, you are required to select the option of Check for updates.

Click on the option of “ Check for Updates”.

Once you click on this option, you will have to install the updates automatically.

 Once all the Updates of Windows are complete, turn on your computer one more time and try printing a file and see if the printer works.

So, these are the steps that one needs to follow to fix the HP printer driver that is not available on Windows 10.

Read more about our latest Blog :- HP OfficeJet Pro 6958 Printer Setup Guide